-
Bituminous Felt Membranes, Flat Roofing
IKO TGX 2mm Underlay (Sand) Per Roll
IKO TGX� Torch-On Underlay consists of a glass tissue carrier coated with polymer modified bitumen. The upper surface is finished with fine sand and the lower surface has a thermofusible film which rapidly melts during the torching operation. IKO TGX� torch-on cap sheets are available Colour: Sand Product Finish: Sand Installation Method: Torch-On Project Type: Commercial Small, Domestic Large, Domestic Medium, Domestic Small, weight 32.5 kg x width x 1000mm length 16 meter.
SKU: IKO10023 -
Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Pitched
175 mm x 30 Degree Lead Slate
Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Custom Made Weatherings & Trims, Pitched175 mm x 30 Degree Lead Slate
Lead Slates are a permanent solution to weathering penetrations through pitched and flat roofs such as pipes & cables, lead weatherings are a requirement by most roofing material manufactures along with building regulations. all lead weatherings are Manufactured at our own premises from milled lead sheet by our highly skilled staff, once your new weathering has been installed a coat of patination oil should be applied to prevent unsightly staining and run off from the oxidization of the lead as this will stain any other material adjacent to the lead, we can make and supply weatherings for most applications, simply call or email us with your requirements.(PLEASE NOTE that all weatherings from stock are made with a 5mm tolerance to allow for thermal expansion, for example a 50mm lead sleeve being placed over a pipe will be made to 55mm)
SKU: AALS14 -
GRP - Fibreglass, GRP – Fibreglass, Liquid Coatings, Liquid Coatings, Liquid Compounds
Flexiglass Encapsulating Primer 5 Kg
GRP - Fibreglass, GRP – Fibreglass, Liquid Coatings, Liquid Coatings, Liquid CompoundsFlexiglass Encapsulating Primer 5 Kg
The Cromar Flexiglass system is a revolutionary multi-surface GRP overlay system, designed to work on existing roofs. It provides a hard-wearing and rapid-curing solution to roofing repairs. catalysed resin is used to sandwich a layer of Chopped strand fibre glass matt, Cromar resin is pure resin, not blended. There are none of the additives that are added to other, more cheaper resins, which won’t perform as well, Cromar’s resin is thinner than a general purpose resin, meaning it can withstand the wide temperature variations a roof is subjected to, Styrene-free so no strong odour, Overlay resin system, High flex resin properties, Rapid cure system Application Ideal for large and small flat roofs, including those that see heavy foot traffic or are load bearing. Roofing felt, Asphalt, Single ply membranes, Metals, Existing liquid applied systems, Coverage 2kg per m2 of top coat resin, 500g/m2 of Encapsulating Primer, 25g Catalyst per kg
SKU: CROM92 -
Bituminous coatings, Bituminous Compounds, Liquid Coatings, Liquid Coatings, Liquid Compounds, Repair Kits
Black Bitumen paint 5 ltr
Bituminous coatings, Bituminous Compounds, Liquid Coatings, Liquid Coatings, Liquid Compounds, Repair KitsBlack Bitumen paint 5 ltr
A solvent based, general purpose, bituminous black paint for waterproofing and weather protecting of steelwork, asphalt, wood and concrete. When dry it forms an odourless and taint-free bitumen film. Cromars Black Bituminous Paint forms a waterproof, weatherproof, corrosion resistant protective coating. It is resistant to low concentrations of alkalis and acids and can withstand prolonged oxidation. It is suitable for application to a wide variety of surfaces including steel, iron, lead, zinc, aluminium, concrete, stone and brick but is mainly used for the following: – Metal protection for any type of exterior metalwork, fire escapes, ladders, gutters etc. A protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces.
SKU: CROM22 -
Bituminous Felt Membranes, Flat Roofing
IKO TGX 2mm Underlay (Sand) Pallet Qty 30 Rolls
IKO TGX� Torch-On Underlay consists of a glass tissue carrier coated with polymer modified bitumen. The upper surface is finished with fine sand and the lower surface has a thermofusible film which rapidly melts during the torching operation. IKO TGX� torch-on cap sheets are available Colour: Sand Product Finish: Sand Installation Method: Torch-On Project Type: Commercial Small, Domestic Large, Domestic Medium, Domestic Small, weight 32.5 kg x width x 1000mm length 16 meter.
SKU: IKO10024 -
Bituminous Felt Membranes, Flat Roofing
Challenge 180 Roll & Pour (Sand 20m) per Roll
IKO Challenger is a simple range of reinforced bitumen roofing membranes, which are suitable for domestic and commercial applications, with a polyester base for toughness and durability. The sand surfaced IKO Challenger Underlay can be used where additional surfacing in the form of chippings or promenade tiles will be provided. An SBS cap sheet with a green slate surface membrane is available for use as a cap sheet without the need for additional surface protection. IKO Challenger Membranes (cap sheet and underlay) have polyester bases and modified bitumen coatings. Traditional pour & roll application Green surface finish Tough 180g/m_ polyester base options SBS bitumen coating Manufactured to BS 8747 15 year materials guarantee Colour: Sand | Green Product Finish: Sand | Mineral, Installation Method: Pour & Roll Project Type: Commercial Small, Domestic Large, Domestic Medium, Domestic Small, (Mineral) weight 35 kg x width x 1000mm length 10 meter, (Sand) weight 40 kg x width x 1000mm length 20 meter,
SKU: IKO10040
Top Rated Products
[top_rated_products per_page="8" columns="4"]